Home About Us Products Quotes Inquiries Contact Us
High Speed Roll-Up Doors
Dock Seals And Shelters
Dock Seals
Dock Shelters
Inflatable Seals And Shelters
Rail Shelters
Impact Doors
Bug Doors
Clear Strip Curtains
Rain Deflectors   V14/V18/V22 ADJUSTABLE HEADER INFLATABLE DOCK SEAL
Breakaway Panels
Designed for door openings up to 8' W x 10'H, the Series V14/V18/V22 Inflatable Dock Door Seal services a wide variety of different trailer heights. Since the trailer is spotted before the seal is inflated, the V Series is the ideal solution to eliminate potential damage to the structure of the building wall. This unique sealing process seals effectively and completely even
if the trailer is off center, jack-knifed, or on a sloped approach. Super Seal's exclusive “Rip Stop” fabric developed specifically for inflatable products will give years of trouble free service. The Series V14/V18/V22 creates an optimum seal that blocks out foul weather, insects, dust, and dirt, while saving money on energy costs. Inflatable dock door seals help productivity by increasing safety, protecting personnel, products, and equipment. Series V14/V18/V22 standard dimensions for door openings 8'0”W x 10' H are 9'4”Wx 11'8” H (O.D.) with a 14”, 18”, 22” projection, 12' face across the vertical air bags, and a 48' header air bag when inflated. 		V14/V18/V22 Inflatable Dock Shelter
Guide Light Systems
Dock Accessories
Download Brochure
 


This adjustable header inflatable dock door seal unit consist of two (2) vertical air bags to be fastened onto a 2" x 8" select kiln-dried pressurized wood (supplied unassembled by manufacturer), through brass plated grommets using galvanized wood screws. Verticals to have a slight upward taper from back to front to avoid pinching or sagging when deflated. The bottom of the vertical seals to include brass plated grommets for venting of air and to assist in moisture drainage. Inflatable header air bag
to be full width over vertical seals mounted on a select kiln-dried pressurized wood frame.

Inflatable header air bag in deflated mode is stored behind a reinforced vinyl curtain with a 4" yellow guide stripe to aid in the spotting of trailers. Unit to be supplied with 1/2 HP, 115 V, 60/50 Hz, motor/blower with a manual ON/OFF. The motor/blower shall be mounted under a protective canopy constructed of a wood/steel galvanized framework covered with galvanized steel cladding. The top canopy shall be peaked to allow drainage and shall be fastened to the wall by means of galvanized steel side and strapping supports.

Unit is inflated by turning switch on and deflates automatically when unit is turned of by means of internal pulley and retraction arm system for the verticals (excluding V14) and a torsion roller assembly for the header. Unit to be manufactured of exclusive 16 oz. vinyl "RipStop" fabric. Double stitched, high strength, twisted 4-ply 100% polyester treated used for sewing throughout. Unit shall be furnished with all necessary mounting hardware, galvanized to resist corrosion.

 

◄ Previous

1 2 3 4
Next ►